Assembly Guides & Tips: Halls Gardenbuildings :

As the proud owner of a Halls garden building you will want to get started on assembly the minute it arrives.

It may look complicated but follow our easy to use instructions and you should have your new garden building assembled in no time.

Deciding where to site your greenhouse
It's best to site your greenhouse in a sunny spot and preferably in a sheltered spot to protect it from the wind

Don't forget to check with your local planning department if there are any restrictions regarding erecting a shed or a greenhouse.
You'll also need to make sure that you comply with any building regulations.

Before you start to assemble
It's always a help to plan what you are going to do and start by understanding what all the bits and pieces are for. Why not check all of the parts against the parts list and lay them out so that you can find them more easily as you go along, although try not to mix them all up!
In the unlikely event that you find a part missing, please contact our customer care team who will be happy to help you and send out the
missing item by return.

Essential tools
You don't need any more than normal
household tools to assemble your Halls garden
building. We recommend you have the
following tools and equipment easily to hand
before you start.

      1.8m step ladder

      Tape measure

      Mallet

      Cross Head Screw Driver

      10mm and 17mm spanners

      Craft Knife

Caring for your greenhouse
Your lovely new greenhouse can be kept looking
sparkling by washing thoroughly with a mild
detergent solution. If you have chosen
polycarbonate panels instead of glass check the
manufacturers' directions on any detergent you
use to make sure it won't tarnish the aluminium
frame or plastic glazing strips.